Solid Carbide Hob
2022-11-03 10:00:08
jiangxingTools
2653
Solid Carbide Hob
Processing step for tungsten carbide gear hob cutter as following:
step o1-raw carbide material
step 02-inside diameter
step 03-end face grinding
step 04-hub grinding
step 05-tooth groove grinding
step 06-tooth profile grinding
step 07-final inspection
step 08-coating
相關(guān)文章
-
PA20° Standard Involute Gear Milling Cutter with Module m0.8
PA20° Standard Involute Gear Milling Cutter with Module m0.8Module: m0.8, pressre angle: 20°Dimensio... - Disk Type Shaper Cutters with GB 6081
- PA20° Standard Involute Gear Milling Cutter with Module m0.6
- Sprocket Milling Cutter
- PA20° Profile DIN3972 Standard Pre-grinding Gear Cutting Hob with Module m2.75
- PA20° Standard Gear Milling Cutter with Module m1
- PA20° Profile DIN3972 Standard Pre-grinding Hob with Module m3.25
