Small Module Taper Shank Gear Shaper Cutter
2025-01-05 09:11:41
jiangxingTools
679
Small Module Taper Shank Gear Shaper Cutter
Module: m0.3, m0.4, m0.5, m0.6, m0.7, m0.8, m0.9, m1.0
Pressure angle: 20°
Morse taper: MK2
Length: 70mm
Tooth profile is according to GB standard
Material: HSS M35, M42, ASP2052, S390, S290 and Carbide+AP coating
Accuracy: Class A quality
相關(guān)文章
-
PA30° DIN5480 Involute Spline Gear Hob with Module m1.5
PA30° DIN5480 Involute Spline Gear Hob with Module m1.5Tooth profile：GB, DIN5480 standardMaterial：HS... - HSS Fine Pitch Gear Hob Cutter with DIN 58412 Standard
- PA20° Module m4.5 Standard Involute Hob
- PA20° Profile DIN3972 Standard Pre-grinding Gear Hob with Module m4
- Hob Resharpening
- Defination of Basic Hob Profiles
- PA20° Full-Topping Gear Cutter Hob with HSS Material
