The Method of Hob Computation
2021-08-26 13:43:54
jiangxingTools
3152
The Method of Hob Computation
Normal pitch=Mn x Π（Mn: Normal Module)
Axial pitch=Mn/cos LA
Lead=Axial pitch x Number of start
LA(Lead Angle)=sin-1(Mn x Number of start/Hob PCD)
Cam amount(relief amount)=Hob OD x Π x tan(cam angle)/Hob NT
Cam angle: Generally PA20°-10°， 14.5°-12°，25°-9°
Groove Lead=Hob PCD x Π/tan LA
Flute depth= Total tooth height if a hob+ Cam amount+1.5mm
Hob's Relief Angle=tan-1(tan PA x tan Cam angle)
相關文章
-
PA20° Module m3 Standard Involute Gear Hob
PA20° Module m3 Standard Involute Gear HobTooth profile: DIN3972-2 standard, GBMaterial：HSS M2, M35,... - Hub-type shaper cutter with DIN 3972/II
- PA30° DIN5480 Involute Spline Hob Cutter with Module m6
- HSS M2,M35, ASP30, ASP52, S390 Material Worm Wheel Gear Hobs
- PA20° Standard Gear Milling Cutter with Module m2.75
- Solid Gear Hob with Standard Dimensions
- PA20° Profile DIN3972 Standard Pre-grinding Gear Hobbing Cutter with Module m2.25
