Hob Materials
2021-08-07 09:27:43
jiangxingTools
3643
Hob Materials
the standard material is the high speed steel EM2, EM35 and EM42. For higher cutting speeds and feeds, high-alloy high-speed steels ASP2030, ASP2052, S390, MC90 are used which were produced with the powder-metallurgy process.
An increase in performance over PM-HSS can be achieved by the new speedcore material. Speedcore is made from cobalt, molybdenum and carbon-free iron. This combination enables a marked increase of the read hardness of the cutting material compared to traditional PM-HSS substrates.
Carbide materials are used for high-performance milling in wet and dry machining or for skiving hobs.
相關(guān)文章
-
PA20° Inserted Blade Gear Hob with Module m22
PA20° Inserted Blade Gear Hob with Module m22Material：HSS M2, M35Tooth profile is according to DIN39... - RS40 Roller Chain Sprocket Hob with Pitch 12.7 x Roller Dia. 8.51
- Disc-type shaper cutter with DIN 5480
- PA20° Pre-shaving Gear Hob with Module m8
- PA20° Standard Gear Milling Cutter with Module m0.4
- PA20° Profile DIN3972 Standard Pre-grinding Gear Hob with Module m5
- Nominal PCD 180mm M1.75 Gear Shaving Cutter with PA20°
